Home -> Products ->Wheel Loader 952A
952A Wheel loaders are the third generation products used most advanced technology and design methods by our 
company. These loaders adopt general driving system, double pumps concourse technology and strengthened vehicle frame. The operation comfortableness and security is scientific adjustment. And world mature technology makes it be hi-quality.
Features of Wheel Loaders
1 Modern design.
2 Super-length body by optimized design, the articulated point is center layout, small turning radius, resistance and wear is reduced.
3 With “WEICHAI WD615 67G3-36” engine, big power reserves, low fuel consumption and good power performance.
4 Coaxial flux zoom articulated steering system, agility turning.
5 Hydraulic system adopts double pumps concourse technology, which saves fuel and improves fuel economy and working efficiency.
6 Optimized single swing arm, short rod, horizontal moving arm cylinder.
7 Hydraulic pre-oriented operation, agility operation and hi-efficiency. The total cycle time is only 10.8 sec.
8 Completed closed cabin, low noise, the direction pole is adjustable and comfortable handles.
Parameter of Wheel Loaders
| Model | Bucket Type Bucket | Capacity | Unloading Height | Unloading Distance (mm) |
|---|---|---|---|---|
| 952A | Standard Bucket/Rocket Bucket | 3．0 | 3140 | 1060 |
| Coal Bucket | 3．6 | 3050 | 1135 | |
| 952A Extension Arm | Standard Bucket | 3．0 | 3450 | 1070 |
| Coal | Bucket | 3．6 | 3340 | 1130 |
| Coke Bucket | 4．2 | 3260 | 1215 | |
| 952A Overlong Arm | Standard Bucket | 3．0 | 3600 | 1190 |
| Coal Bucket | 3．6 | 3500 | 1283 | |
| Coke | 4．2 | 3407 | 1356 |
Parameters of 952A Loaders
Bucket capacity (m3) |
3.0 |
Rated load (t) |
5 |
Operational mass (t) |
16500 |
Total three-item cycle time (s) |
10.8 |
Max. breakout force (kN) |
175 |
Max. grading (o) |
25 |
Min. turning radius (mm) |
5890 |
Min.ground clearance(mm) |
415 |
Overall Dimension |
|
Length × Width × Height (mm) |
7927×3000×3370 |
8450×3000×3370 |
|
Wheel base (mm) |
3200 |
Wheel tread (mm) |
2200 |
Engine |
|
Model |
WD615G220 |
Rated power (kW) |
162 |
Rated rotate speed (r/min) |
2200 |
Max. torque (N.m) |
843 |
Rated fuel consumption (g/kW.h) |
215 |
Torque Converter |
|
Type |
Double-turbine single stage integrated type |
Coefficient |
4.7±50% |
Transmission case |
|
Type |
Planetary type hydraulic gearshift |
Gears |
Two forward and one backward |
Max. travel speed (km/h) |
36 |
Driving Axle |
|
Main driving type |
Spiral bevel gear one-stage deceleration |
Wheel deceleration type |
Spur gear planet deceleration |
Tyre |
|
Size |
23.5-25-16PR |
Steering System |
|
Type |
Full hydraulic coaxial flow amplifying articulated steering system |
Steering angle |
37o on both sides |
Working Hydraulic System |
|
Working pump |
CBGj 3100 |
Working hydraulic system pressure (Mpa) |
16 |
Brake System |
|
Service brake |
Single pipe air over hydraulic disc brake |
Parking brake |
Mechanically-controlled belt brake |
>>GMC-DD01 Double Drum Road Roller
>>GMC-DD02 Double Drum Road Roller
>>GMC-DD03 Double Drum Road Roller
>>GMC-DD04 Double Drum Road Roller
>>GMC-DD05 Double Drum Road Roller
>>GMC-DD06 Double Drum Road Roller
>>GMC-DD07 Double Drum Road Roller
>>GMC-DD08 Double Drum Road Roller
>>GMC-DD09 Double Drum Road Roller
>>GMC-DD10 Double Drum Road Roller
Tel: 0086-371-86079028 Fax: 0086-371-86079027 E-mail: mia@gcmec.com
Add: Rm.1704 Manhattan Commercial Plaza,Jinshui Rd.,Zhengzhou,China
Copyright Notice © 2009 roadrollerchina.com All Rights Reserved
We offer a toll free sales and support line as well as email support to ensure you are getting the best road roller available.